Razor Ribbon Fence Pickets

Razor-Ribbon-Fence-Pickets

Exterior Perimeter Security Products

Razor Ribbon® fence pickets are designed for the rapid installation of a security perimeter. After the post is driven into the ground, barbed wire is inserted into the built-in slots along the length of the perimeter. This system can either stand alone or be augmented with the addition of BTC barbed tape concertina attached to the barbed wire when needed.

The fence picket is constructed from steel conforming to ASTM A1011, producing a yield strength of 50,000 psi (345 MPa), and complies with federal specifications and GSA guidelines for fence post, drive type, and spadeless.

The posts, depending on length, have alternating slots on each side every 9″ (229mm) to accommodate strands of barbed wire. The post width is approximately 3″ (76mm) and can be ordered in a variety of lengths ranging from 32″ to 96″ (81cm to 244cm).

The standard exterior color is forest green with additional colors and/or galvanization available upon request.

Refer to military specification A-A-55523 for additional information.

Manufacturing

  • The fence picket is constructed from steel conforming to ASTM A1011, producing a yield strength of 50,000 psi, and complies with federal specifications and GSA guidelines for Fence Post, Drive Type, Spadeless.
  • The standard exterior color is forest green with additional colors and/or galvanization available upon request.
  • The posts, depending on length, have alternating slots on each side every 9” to accommodate strands of barbed wire.
  • The post width is approximately 3” and can be ordered in a variety of lengths ranging form 60” to 96”.

Razor Ribbon Fence Pickets

NSNLengthWidthSlots
(in)(mm)(in)(mm)
5660-00-270-1589328133765
5660-00-270-15876015243764
5660-00-270-15107218293764
5660-00-262-99149624383762

Razor-Ribbon Fence Pickets